Powermatic PM1200 1791330 Air Filtration System

Includes PM1200 1/4 HP Air Filtration System - 1791330

The Powermatic PM1200 Air Filtration System uses a two-step filtration process to trap up to 99% of five-micron particles and 85% of one-micron particles. This unit can be operated at the cabinet or with the included remote radio frequency transmitter. It includes necessary hardware for mounting to the ceiling and comes with filter guards that can be installed and removed without tools.

The PM1200 Air Filtration System At a Glance: Double filtration system traps particles as small as 1 micron Remote control operates on radio frequency for wider range Includes timer with 9 settings for up to 9 hours of continuous operation Includes 4 eye bolts for suspension from shop ceiling Indicator lights up after 200 hours to remind user to replace filters

The PM1200's two-step filtration system captures particles as small as one micron. View larger.

The exit filter disperses clean air, providing you with a debris-free work environment. View larger.

Traps 99% of Five Micron and 85% of One-Micron Particles
Designed to strike the proper balance between air flow and filtration, the PM1200 is ideal for the professional woodworking shop, where dirt and debris can compromise air quality. The PM1200 uses two filter stages: the outer filter captures large particles and the inner filter catches the smaller particles that pass through the outer filter.

The electrostatic, disposable outer filter removes 99% of five-micron particles, while the inner filter captures 85% of one-micron particles and has high-mesh pockets that can be blown clean.

Readily-Available, Durable Filters
For easy maintenance, the PM1200 uses intake filters measuring 24.0 x 12.0 x 1.0 inches (WxHxD), a readily available size. The exit filter does not require replacement and can be periodically cleaned with a vacuum or compressed air to ensure efficient operation.

Both the inlet and outlet filter guards are easy to install and remove without tools. The system grilles are secured via simple, finger-operated catches--they come off easily but stay securely in place during use.

Full Set of Controls to Save Energy
Because woodworking shops have fluctuating levels of dust, the PM1200 features a full set of controls, all of which are conveniently located both on the system itself and on the included remote control with easy-to-read LCD screen. Set one of the three available speeds--Low (547 CFM), Medium (706 CFM), or High 1,196 (CFM)--to match current conditions and save on energy costs.

To ensure long-term performance, the PM1200 also boasts a programmable timer with nine settings for up to nine hours of operation, a re-settable pop-out fuse that protects the unit in case of a power surge, and a "change filter" light that automatically comes on after 200 hours of use.

The PM1200 is backed by a five-year warranty.

What's in the Box
Air filtration system; remote control with mounting bracket; nine-volt battery; four eye bolts; four hex nuts; four flat washers; manual; and warranty card.

The on-board panel and remote control allow you to use the PM1200 from anywhere. View larger.